Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 Bridge Configuration Commands
3Com Corporation
3-17
Flag meaning: P--PERMIT N--DENY D--DYNAMIC S--STATIC
Table 3-4 Description on the fields of the display bridge address-table command
Field Description
Mac-Address MAC address
Set Bridge set number
Flag
Four options available: P--PERMIT,
N--DENY, D--DYNAMIC and S--STATIC
P refers to the "permit" rule in the MAC
address filtering;
N refers to the "deny" rule in the MAC
address filtering;
D refers to an dynamic entry;
S refers to a static entry.
Aging-time
Time a forwarding table entry has
existed.
Receive
Number of Packets number received
with this destination MAC address
Send
Number of Packets sent to this
destination MAC address
Interface-name Name of the outbound interface
3.1.21 display bridge information
Syntax
display bridge information [ bridge-set bridge-set ]
View
Any view
Parameter
bridge-set: Bridge set number, in the range 1 to 255.
Description
Use the display bridge information command to view the information of one or all the
enabled bridge sets in bridge module.
Example
# Display the information of all the enabled bridge sets.
<3Com> display bridge information