Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 Bridge Configuration Commands
3Com Corporation
3-22
The information displayed and described in the following table is:
the statistic of interface Ethernet0/0/0 in bridge set 1 :
Input:
10 total, 1 bpdu, 2 single,
0 multi, 0 broadcast;
0 ip,0 ipx, 0 other protocol;
0 eth2, 0 snap,
0 dlsw, 0 other,
0 vlan;
Output:
0 total, 0 bpdu, 0 single,
0 multi, 0 broadcast;
0 ip, 0 ipx, 0 other protocol;
0 eth2, 0 snap,
0 dlsw, 0 other,
0 vlan;
Send Way: 0 broadcast, 0 fast, 0 other
Discard:
0 by inport state,
0 for local frame ,
0 by mac table,
0 by inport filter,
0 by outport filter,
0 by ip filter ,
0 other
Table 3-7 Description on the fields of the display bridge traffic command
Field Description
Input
Type and quantity of input packets on
the interface. “10 total,1bpdu, 2 single”
indicates there are totally 10 data
packets input, with 1 BPDU packet and 2
single broadcast packets.
Output
Type and quantity of output packets on
the interface.
Send way Way of data transmission.
Discard
Reason for discarding and quantity of
discarded packets.
0 by inport state
Frames discarded due to the abnormal
in-port state.