Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-3
Example
# Start the auto-config operation.
[3com] auto-config
1.1.2 auto-config enable
Syntax
auto-config enable
undo auto-config
View
System view
Parameter
None
Description
Use the auto-config enable command to enable auto-config.
Use the undo auto-config command to disable auto-config.
By default, auto-config is enabled.
Use the display auto-config command to check if auto-config is enabled.
Related command: display auto-config.
Example
# Enable auto-config.
[3com] auto-config enable
# Disable auto-config.
[3com] undo auto-config
1.1.3 display auto-config
Syntax
display auto-config
View
Any view
Parameter
None