Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 Bridge Configuration Commands
3Com Corporation
3-26
[3Com-Etherhet0/0/0] firewall ethernet-frame-filter 4000 inbound
# Apply ACL 4001 to the outbound direction of interface dialer 0.
[3Com-Dialer0] firewall ethernet-frame-filter 4001 outbound
3.1.27 fr map bridge
Syntax
fr map bridge dlci broadcast
undo fr map bridge dlci
View
Interface view
Parameter
dlci: Local VC number in the range 16 to 1007.
broadcast: Specifies the broadcast attribute of the map.
Description
Use the fr map bridge command to add a bridge-set to frame relay map entry.
Use the undo fr map bridge command to delete a bridge-set to frame relay map entry.
By default, no bridge-set to frame relay map is configured.
Related command: display fr map.
Example
# On the interface Serial1/0/0, configure a bridge-set to frame relay map entry on the
VC with DLCI 50.
[3Com-Serial1/0/0] fr map bridge 50 broadcast
3.1.28 interface bridge-template
Syntax
interface bridge-template bridge-set
undo interface bridge-template bridge-set
View
System view
Parameter
bridge-set: Bridge set number, an integer in the range 1 to 255.