Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 Bridge Configuration Commands
3Com Corporation
3-29
3.1.32 reset stp statistics
Syntax
reset stp statistics
View
User view
Parameter
None
Description
Use the reset stp statistics command to clear statistics about the spanning tree.
Example
# Clear statistics about the spanning tree.
<Router> reset stp statistics
3.1.33 x25 map bridge
Syntax
x25 map bridge x121-address x.121-address broadcast
undo x25 map bridge x121-address x.121-address
View
Interface view
Parameter
x121-address x.121-address: Remote X.121 address.
broadcast: Sends broadcast packets to the X.25 destination.
Description
Use the x25 map bridge command to map an X.121 address to a bridge-set.
Use the undo x25 map bridge command to delete the configured map entry.
By default, no bridge-set to X.25 map is configured.
Related command: display x25 map.
Example
# Configure a map entry on the X.25 interface Serial0/0/0.
[3Com] interface serial 0/0/0