Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-5
Related command: display debugging.
Example
# Enable IP packet debugging.
<3com> debugging ip packet
IP packet debugging switch is on.
1.2.2 display debugging
Syntax
display debugging [ interface interface-type interface-number] [ module-name ]
View
Any view
Parameter
module-name: Module name.
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display debugging command to view the enabled debugging switches.
By default, no parameters are defined and all the enabled debugging switches are
displayed.
Related command: debugging.
Example
# Display all the enabled debugging switches.
<3com> display debugging
IP packet debugging switch is on.
1.2.3 display diagnostic-information
Syntax
display diagnostic-information
View
Any view
Parameter
None