Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 ARP Configuration Commands
3Com Corporation
2-6
View
User view
Parameter
all: Indicates to clear all ARP entries.
dynamic: Indicates to clear the dynamic ARP entries.
static: Indicates to clear the static ARP entries.
interface: Indicates the selected interface.
interface-type: Interface type.
interface-number: Interface sequence number.
Description
Use the reset arp command to clear the ARP entries in the ARP mapping table.
When operation is performed to the interface with specified interface, the interface
type can only be Ethernet, GE or virtual Ethernet and only the dynamic entries can be
deleted on the interface.
Related command: arp static and display arp.
Example
# The following example shows how to delete the dynamic entries in the ARP mapping
table on Ethernet 0/0/0.
<3Com> reset arp interface Ethernet 0/0/0
2.2 Proxy ARP Configuration Commands
2.2.1 arp-proxy enable
Syntax
arp-proxy enable
undo arp-proxy enable
View
Ethernet interface view
Parameter
None
Description
Use the arp-proxy enable command to enable proxy ARP on an interface.