Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-6
Description
Use the display diagnostic-information command to view the operating information
about the active modules in the system.
When fault occurs to the system, you need to collect lots of information in order to
addressing the issue. It is rather difficult, however, for you to collect all the information
at a time as this involves many display commands. To do that, you can use the display
diagnostic-information command.
Example
# Display the technical support information.
<3com> display diagnostic-information
<3com> display diagnostic-information
=================================================
===============display clock===============
=================================================
14:04:23 UTC Thu 09/16/2004
===================================================
===============display version====
===================================================
… …
==========================
===============vrbd===============
========================================
… …
==================================================
===============display device===============
==================================================
… …
=================================================================
===============display current-configuration===============
=================================================================
… …
===============================================================
===============display saved-configuration=====
===============================================================
… …