Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 IP Accounting Configuration Commands
3Com Corporation
6-1
Chapter 6 IP Accounting Configuration
Commands
6.1 IP Accounting Configuration Commands
6.1.1 debugging ip count
Syntax
debugging ip count { data | error | all }
undo debugging ip count { data | error | all }
View
User view
Parameter
data: Enables data procedure debugging.
error: Enables error debugging.
all: Enables all debugging.
Description
Use the debugging ip count command to enable debugging for the IP Accounting
module (the IP Accounting).
Use the undo debugging ip count command to disable debugging for the IP
Accounting.
By default, debugging for the IP Accounting is disabled.
Table 6-1 Description on the fields of the debugging ip count data command
Field Description
IPA_In: Begin processing of
inbound-packet.
IPA is enabled on the router. An IP
packet arrived at the router.
Protocol:1 Direction: 10.153.72.1 -->
10.153.72.150 From:Ethernet0/0/0
IPA is enabled on the router. An IP
packet arrived at the router.
Dealing with the inbound-packet
permitted by the firewall.
IPA is enabled on the router. An IP
packet arrived at the router and passed
the firewall on the inbound interface.
Counting of inbound packets is enabled
on the interface.