Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 IP Accounting Configuration Commands
3Com Corporation
6-2
Field Description
Dealing with the packet denied by the
firewall.
IPA is enabled on the router. An IP
packet arrived at the router and denied
by the firewall on the inbound interface.
Counting of denied inbound packets is
enabled on the interface.
IPA_In: Finish processing of
inbound-packet.
IPA is enabled on the router.
The inbound IP packet was counted
correctly.
IPA_Out: Begin processing of
outbound-packet.
IPA is enabled on the router.
An outbound IP packet was present.
Protocol:1 Direction: 10.153.72.150 -->
10.153.72.1 To:Ethernet0/0/0
IPA is enabled on the router.
An outbound IP packet was present.
Dealing with the outbound-packet
permitted by the firewall.
IPA is enabled on the router.
An outbound IP packet was present and
permitted by the firewall.
Counting of permitted outbound packets
is enabled on the outbound interface.
Dealing with the packet denied by the
firewall.
IPA is enabled on the router.
An outbound IP packet was present and
then denied by the firewall on the
outbound interface.
Counting of denied outbound packets is
enabled on the outbound interface.
IPA_Out: Finish processing of
outbound-packet.
IPA is enabled on the router.
The outbound IP packet was counted
correctly.
Note:
IPA – IP Accounting
Inbound (or outbound) IP packets include both legitimate IP packets and illegitimate
IP packets.
In this chapter, legitimate packets refer to IP packets permitted by the firewall;
illegitimate packets refer to IP packets denied by the firewall.
Table 6-2 Description on the fields of the debugging ip count error command
Field Description
Failed to allocate memory Memory allocation failed.
Null parameter inputted while clearing
protocol hash list.
Delete a null protocol entry.
Error: Deleting address node failed
because of giving a NULL pointer!
The system failed to delete an address
node because of a null pointer.