Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 IP Accounting Configuration Commands
3Com Corporation
6-6
Description
Use the ip count enable command to enable IP accounting.
Use the undo ip count enable command to disable IP accounting.
By default, IP accounting is disabled.
Example
# Enable IP accounting.
[3Com] ip count enable
6.1.5 ip count exterior-threshold
Syntax
ip count exterior-threshold number
undo ip count exterior-threshold
View
System view
Parameter
number: Maximum number of entries in the exterior hash table, in the range 0 to 8192.
Description
Use the ip count exterior-threshold command to configure maximum number of
entries in the exterior hash table, with each entry for an IP packet that does not match
any IP accounting rule.
Use the undo ip count exterior-threshold command to restore the default value, that
is, 0. When doing this, you are prompted to clear the table first if the number of entries
that already existed in the table exceeds the default.
By default, maximum number of entries in the exterior hash table is 0.
Example
# Set maximum number of entries in the exterior hash table to 100.
[3Com] ip count exterior-threshold 100
# Restore the default maximum number of entries in the exterior hash table.
[3Com] undo ip count exterior-threshold
6.1.6 ip count firewall-denied