Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 IP Accounting Configuration Commands
3Com Corporation
6-9
[3Com] ip count interior-threshold 1000
# Restore the default maximum number of entries in the interior hash table.
[3Com] undo ip count interior-threshold
6.1.9 ip count outbound-packets
Syntax
ip count outbound-packets
undo ip count outbound-packets
View
Interface view
Parameter
None
Description
Use the ip count outbound-packets command to configure the IP Accounting to count
outbound IP packets on the current interface.
Use the undo ip count outbound-packets command to restore the default.
By default, outbound IP packets on the interface are not counted.
When counting outbound IP packets on the interface, the IP Accounting assigns them
to the exterior hash table or the interior hash table according to the IP count rule list.
Example
# Configure the IP Accounting to count outbound IP packets on an interface.
[3Com-Ethernet0/0/0] ip count outbound-packets
# Configure the IP Accounting not to count outbound IP packets on an interface.
[3Com-Ethernet0/0/0] undo ip count outbound-packets
6.1.10 ip count rule
Syntax
ip count rule ip-address net-mask
undo ip count rule [ ip-address net-mask ]
View
System view