Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 6 IP Accounting Configuration Commands
3Com Corporation
6-11
Description
Use the ip count timeout command to configure the aging time of IP accounting
entries.
Use the undo ip count timeout command to restore the default aging time, that is, 720
minutes or 12 hours.
If an IP accounting entry does not receive a new IP packet before its aging time expires,
the entry is considered expired and then deleted.
Example
# Set the aging time of IP accounting entries to 100 minutes.
[3Com] ip count timeout 100
# Restore the default aging time of IP accounting entries.
[3Com] undo ip count timeout
6.1.12 reset ip count
Syntax
reset ip count { interior | exterior | firewall-denied | all }
View
User view
Parameter
firewall-denied: Information about the IP packets denied by the firewall.
interior: Information about the IP packets in an interior hash table.
exterior: Information about the IP packets in an exterior hash table.
all: All IP accounting tables.
Description
Use the reset ip count command to clear information that the IP Accounting retained
about IP packets.
Example
# Clear all IP accounting tables.
<3Com> reset ip count all