Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 7 UDP Helper Configuration Commands
3Com Corporation
7-2
Description
Use the display udp-helper server command to display the information about the
destination servers associated with the specified or all Ethernet interfaces.
Example
# Display the information about the destination servers associated with Ethernet
interface 0/0/0.
<3Com> display udp-helper server interface ethernet 0/0/0
interface name server address packets send
ethernet0/0/0 192.1.1.2 0
7.1.3 udp-helper enable
Syntax
udp-helper enable
undo udp-helper enable
View
System view
Parameter
None
Description
Use the udp-helper enable command to enable UDP Helper.
Use the undo udp-helper enable command to disable UDP Helper.
By default, UDP Helper is disabled.
Example
# Enable UDP Helper.
[3Com] udp-helper enable
7.1.4 udp-helper port
Syntax
udp-helper port { port | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
undo udp-helper port { port | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
View
System view