Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series
481482483484485486487488489490
3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 8 BOOTP Client Configuration Commands
3Com Corporation
8-2
8.1.2 ip address bootp-alloc
Syntax
ip address bootp-alloc
undo ip address bootp-alloc
View
Ethernet interface view
Parameter
None
Description
Use the ip address bootp-alloc command to configure the Ethernet interface to obtain
IP address using BOOTP.
Use the undo ip address bootp-alloc command to disable the Ethernet interface to
obtain IP address using BOOTP.
By default, the Ethernet interface does not obtain IP address using BOOTP.
Example
# Configure interface Ethernet 0/0/0 to obtain IP address using BOOTP.
[3Com-Ethernet 0/0/0] ip address bootp-alloc