Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-8
*0.62083233-DHCP SER-8-DHCPS_DEBUG_COMMON:
DhcpServer: Send DHCPOFFER to MAC=> 00.05.5D.85.D5.45. Offer IP=> 5.5.5.2
*0.62083366-DHCP SER-8-DHCPS_DEBUG_COMMON:
DhcpServer: receive DHCPREQUEST from 00.05.5D.85.D5.45.
*0.62083483-DHCP SER-8-DHCPS_DEBUG_COMMON:
DhcpServer: Send DHCPACK to MAC=> 00.05.5D.85.D5.45. Offer IP=> 5.5.5.2
# Enable error debugging on the DHCP server.
<3Com> debugging dhcp server error
*0.63269475-DHCP SER-8-DHCPS_DEBUG_COMMON:
DhcpServer: Icmp Packet is not EHHOREPLY!
9.2.4 dhcp server accounting domain interface (in System View)
Syntax
dhcp server accounting domain domain-name { interface interface-type
interface-number [ to interface-type interface-number ] | all }
undo dhcp server accounting domain { interface interface-type interface-number
[ to interface-type interface-number ] | all }
View
System view
Parameter
domain-name: Domain for DHCP accounting. For this domain, a RADIUS scheme must
be configured.
interface-type interface-number [ to interface-type interface-number ]: Indicates an
interface or all interfaces from the first specified interface to the second. Note that the
interfaces must be Ethernet interfaces (or subinterfaces) or virtual Ethernet interfaces.
all: Indicates all interfaces.
Description
Use the dhcp server accounting domain interface command to enable DHCP
accounting for addresses from the address pools of the specified interfaces and
configure a domain for DHCP accounting.
Use the undo dhcp server accounting domain interface command to disable DHCP
accounting for addresses from the address pools of the specified interfaces.
By default, DHCP accounting is not enabled.
Note that you cannot use the display current-configuration command to verify the
configuration made by using the dhcp server accounting domain interface