Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-9
command, which is implemented by executing the dhcp server accounting domain
command repeatedly.
Related command: accounting domain.
Example
# Enable DHCP accounting for addresses from the address pools of Ethernet2/0/0.1 to
Ethernet2/0/0.5, and specify radius_domain as the domain for accounting.
[3Com] dhcp server accounting domain radius_domain interface ethernet 2/0/0.1
to ethernet 2/0/0.5
9.2.5 dhcp server accounting domain (in Interface View)
Syntax
dhcp server accounting domain domain-name
undo dhcp server accounting domain domain-name
View
Interface view
Parameter
domain-name: Domain for DHCP accounting. For this domain, a RADIUS scheme must
be configured.
all: Indicates all interfaces.
Description
Use the dhcp server accounting domain command to enable DHCP accounting for
addresses from the interface address pool and configure a domain for DHCP
accounting.
Use the undo dhcp server accounting domain command to disable DHCP
accounting for addresses from the interface address pool.
By default, DHCP accounting is not enabled.
Related command: accounting domain.
Example
# Enable DHCP accounting for addresses from the interface address pool, and specify
radius_domain as the domain for accounting.
[3Com-Ethernet0/0/0] dhcp server accounting domain radius_domain