Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-19
9.2.16 dhcp server nbns-list (in Interface View)
Syntax
dhcp server nbns-list ip-address [ ip-address ]
undo dhcp server nbns-list { ip-address | all }
View
Ethernet interface (or subinterface) view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP addresses
separated by spaces in a command.
all: All the NetBIOS server IP addresses.
Description
Use the dhcp server nbns-list command in interface view to configure NetBIOS
server addresses in the DHCP address pool of current interface.
Use the undo dns-list command in interface view to delete the configuration.
By default, no NetBIOS address is configured.
By far, only up to eight NetBIOS addresses can be configured in each DHCP address
pool.
Related command: dhcp server ip-pool, dhcp server nbns-list (in system view),
nbns-list, and netbios-type.
Example
# In the DHCP address pool of Ethernet1/0/0, allocate the NetBIOS server at
10.12.1.99 to the clients.
[3Com] interface ethernet 1/0/0
[3Com-Ethernet 1/0/0] dhcp server nbns-list 10.12.1.99
9.2.17 dhcp server nbns-list interface (in System View)
Syntax
dhcp server nbns-list ip-address [ ip-address ] { interface interface-type
interface-number [ to interface-type interface-number ] | all }
undo dhcp server nbns-list { ip-address | all } { interface interface-type
interface-number [ to interface-type interface-number ] | all }
View
System view