Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-40
9.2.36 gateway-list
Syntax
gateway-list ip-address [ ip-address ]
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of egress GW router. You can configure up to eight IP addresses
separated by spaces in a command.
all: IP addresses of all the egress GW routers.
Description
Use the gateway-list command to configure IP addresses of the egress GW routers
used by DHCP clients.
Use the undo gateway-list command to delete the configuration.
By default, no egress GW router is configured.
Related command: dhcp server ip-pool and network.
Example
# Associate the egress GW router at 10.110.1.99 with DHCP address pool 0.
[3Com] dhcp server ip-pool 0
[3Com-dhcp-0] gateway-list 10.110.1.99
9.2.37 nbns-list
Syntax
nbns-list ip-address [ ip-address ]
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of NetBIOS server. You can configure up to eight IP addresses
separated by spaces in a command.
all: All the NetBIOS server IP addresses.