Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-56
View
User view
Parameter
None
Description
Use the reset dhcp relay statistics command to clear the DHCP relay statistics.
Related command: display dhcp relay statistics.
Example
# Clear the DHCP relay statistics.
<3Com> reset dhcp relay statistics
9.4 DHCP Client Configuration Commands
9.4.1 debugging dhcp client
Syntax
debugging dhcp client { event | packet | error | all }
undo debugging dhcp client { event | packet | error | all }
View
User view
Parameter
event: Protocol events of the DHCP client, which include address allocation and data
updating.
packet: DHCP packets received and sent by the DHCP client.
error: Unknown packet information or error information.
all: Enables debugging of the DHCP client in all the information (event, packet, and
error).
Description
Use the debugging dhcp client command to enable debugging on the DHCP client.
Use the undo debugging dhcp client command to disable debugging on the DHCP
client. By default, DHCP client debugging is disabled.
Example
# Enable event debugging on the DHCP client.