Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 9 DHCP Configuration Commands
3Com Corporation
9-57
<3Com> debugging dhcp client event
9.4.2 display dhcp client
Syntax
display dhcp client [ verbose ]
View
Any view
Parameter
verbose: Statistic details of the DHCP client.
Description
Use the display dhcp client command to display the statistic information of the DHCP
client. Executing the command attached without the keyword parameter verbose will
display only the brief address allocation information on the DHCP client.
Example
# Display the statistic details of the DHCP client.
[3Com] display dhcp client verbose
DHCP client statistic information:
Ethernet0/0:
Current machine state: BOUND
Alloced IP: 169.254.0.2 255.255.0.0
Alloced lease: 86400 seconds, T1: 43200 seconds, T2: 75600 seconds
Lease from 2002.09.20 01:05:03 to 2002.09.21 01:05:03
Server IP: 169.254.0.1
Transaction ID = 0x3d8a7431
Default router: 2.2.2.2
DNS server: 1.1.1.1
Domain name: huawei.com
Client ID: HUAWEI-00e0.fc0a.c3ef-Ethernet0/0
Next timeout will happen after 0 days 11 hours 56 minutes 1 seconds.
Ethernet2/0:
Current machine state: HALT
The statistic information shows that two interfaces, that is, Ethernet0/0 and Ethernet2/0,
have been configured to be DHCP clients.
Ethernet0/0 has been assigned with the address 169.254.0.2/16 subject to the lease
expiration of 86400 seconds and the current machine state is BOUND. The renewal
timer is set to 43200 seconds, the rebinding timer to 75600 seconds, and the lease