Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 10
3Com Corporation
10-4
Parameter
None
Description
Use the debugging tcp md5 command to enable the MD5 authentication debugging of
the TCP connection.
Use the undo debugging tcp md5 command to disable the MD5 authentication
debugging of the TCP connection.
Example
# Enable the MD5 authentication debugging of the TCP connection.
<3Com> debugging tcp md5
10.1.4 debugging tcp packet
Syntax
debugging tcp packet [ task_id socket_id ]
undo debugging tcp packet [ task_id socket_id ]
View
User view
Parameter
task_id: The ID of a task.
socket_id: The ID of a socket.
Description
Use the debugging tcp packet command to enable the debugging of TCP connection.
The number of debugging switches users can enable is limited, that is, at the same time
only a fixed number of debugging switches can be enabled (combination of task ID and
socket ID).
Use the undo debugging tcp packet command to disable the debugging of TCP
connection.
Example
# Enable the debugging of TCP connection.
<3Com> debugging tcp packet
<3Com> display debugging
*0.100070-SOCKET-8-TCP PACKET:
1043204051: Input: Co0(5) socketId = 2, state = SYN_SENT,