Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 10
3Com Corporation
10-5
src = 127.0.0.1:1025, dst = 2.2.2.2:23,
seq = 11084380, ack = 0, optlen = 4, flag = SYN ,
window = 8192
1043204051: Output: Co0(5) SocketId = 2, State = SYN_SENT,
src = 127.0.0.1:1025, Dst = 2.2.2.2:23,
Seq = 11084380, Ack = 0, Datalen = 4, Flag = ACK PSH ,
Window = 8192
1043204051: Retrans: Co0(5) SocketId = 2, State = SYN_SENT,
Src = 127.0.0.1:1025, Dst = 2.2.2.2:23,
Seq = 11084380, Ack = 0, Optlen = 4, Flag = SYN ,
Window = 8192
10.1.5 debugging udp packet
Syntax
debugging udp packet [ task_id socket_id ]
undo debugging udp packet [ task_id socket_id ]
View
User view
Parameter
task_id: The ID of a task.
socket_id: The ID of a socket.
Description
Use the debugging udp packet command to enable the debugging of UDP connection.
The number of debugging switches users can enable is limited, that is, at the same time
only a fixed number of debugging switches can be enabled (combination of task ID and
socket ID).
Use the undo debugging udp packet command to disable the debugging of UDP
connection.
Example
# Enable the debugging of UDP connection.
<3Com> debugging udp packet
<3Com> display debugging
*0.377770-SOCKET-8-UDP:
1043494431: Output: task = ROUT(6), socketid = 3,
src = 1.1.1.1:520, dst = 255.255.255.255:520, datalen = 24,