Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 10
3Com Corporation
10-14
10.1.14 display ip interface
Syntax
display ip interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display ip interface command to view IP-related information about the
specified or all interfaces.
By default, if no interface is specified, the IP-related information about all interfaces is
displayed.
The information is helpful for troubleshooting.
Related command: display interface, display ip interface brief.
Example
# Display IP-related information about interface Serial 1/0/0.
<3Com> display ip interface serial 1/0/0
Serial1/0/0 current state :UP
Line protocol current state :DOWN
Internet Address is 1.1.1.2/24
Broadcast address : 1.1.1.255
The Maximum Transmit Unit : 1500 bytes
ip fast-forwarding incoming packets state is Enabled
ip fast-forwarding outgoing packets state is Enabled
IP input packets : 0, bytes : 0, multicasts : 0
IP output packets : 0, bytes : 0, multicasts : 0
TTL invalid packet number: 0
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0
Router advert: 0
Router solicit: 0