Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 10
3Com Corporation
10-22
10.1.20 display udp statistics
Syntax
display udp statistics
View
Any view
Parameter
None
Description
Use the display udp statistics command to view TCP traffic statistic information.
The command is used to display the traffic statistic information of all the active TCP
connections. Statistics information is classified into two parts: receiving and sending,
and each part can be further classified according to different types of packets, as
checksum packets and error packets, for example. Moreover there are statistics closely
related to connection, such as the number of broadcast packets. The statistics
information is organized in terms of packet.
For relate configuration, please refer to the reset udp statistics command.
Example
# Display the UDP traffic statistic information.
<3Com> display udp statistics
Received packet:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
no socket on port: 0
total broadcast or multicast packets : 0
no socket broadcast or multicast packets: 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packet:
Total: 0
Table 10-3 Description on the fields of the display udp statistics command
Field Description
Received packet: Statistics about the received packets
Total: 0 Total number of received UDP packets