Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-18
By default, the display logbuffer command is executed without any parameter
specified to display all information in the log buffer.
If the number of information entries in the current log buffer is smaller than the specified
size-value, all the entries are displayed.
Related command: info-center enable, info-center logbuffer, display info-center.
Example
# Display the information in the log buffer.
<3com> display logbuffer
Logging buffer configuration and contents:enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 4 , Channel name : logbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 96
%8/28/2101 5:34:48-IC-7-SYS_RESTART:
System restarted --
Huawei-3Com Versatile Routing Platform Software
Copyright (c) 2003-2004 by VRP Team Beijing Institute Huawei-3Com Tech, Inc
%Dec 3 09:04:38:723 2004 r2 RM/5/RTLOG:
rtbit_set_vrf:127.0.0.0/8(n_bitsset=0) public vpn-instance(1) -> KRT
%Dec 3 09:04:38:772 2004 r2 SHELL/5/CMD:task:CFM ip:** user:**
command:interfac
e Aux0
%Dec 3 09:04:38:825 2004 r2 SHELL/5/CMD:task:CFM ip:** user:**
command:interfac
e Ethernet0/0
%Dec 3 09:04:38:837 2004 r2 SHELL/5/CMD:task:CFM ip:** user:**
command:interfac
e Serial0/0
%Dec 3 09:04:38:861 2004 r2 SHELL/5/CMD:task:CFM ip:** user:**
command:interfac
e Serial1/0
%Dec 3 09:04:38:887 2004 r2 SHELL/5/CMD:task:CFM ip:** user:**
command:interfac
e Serial1/1