Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 11 NAT Configuration Commands
3Com Corporation
11-1
Chapter 11 NAT Configuration Commands
11.1 NAT Configuration Commands
11.1.1 debugging nat
Syntax
debugging nat { alg | event | packet [ interface { interface-type interface-number ] }
undo debugging nat { alg | event | packet [ interface interface-type
interface-number ] }
View
User view
Parameter
alg: Enables the application level gateway NAT debugging information.
event: Enables NAT event debugging information.
packet: Enables NAT data packet debugging information.
interface: Enables NAT packet debugging for a special interface.
Description
Use the debugging nat command to enable the NAT debugging function.
Use the undo debugging nat command to disable the NAT debugging function.
Example
None
11.1.2 display nat
Syntax
display nat { address-group | aging-time | all | outbound | server | statistics |
session [ vpn-instance vpn-instance-name ] [ slot slot-number ] [source global
global-addr | source inside inside-addr ] [ destination ip-addr ] }
View
Any view