Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-20
Description
Use the display logbuffer summary command to display a summary about the log
buffer on the router.
Example
# Display a summary about the log buffer on the router.
<3com> display logbuffer summary
EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0 0 0 94 0 1 0
The command output shows the number of log entries for each information level in the
log buffer.
1.3.5 display trapbuffer
Syntax
display trapbuffer [ size sizeval ]
View
Any view
Parameter
size: Specifies the number of information entries in the trap buffer.
sizeval: Number of entries to be displayed.
Description
Use the display trapbuffer command to view the information entries in the trap buffer.
By default, the command is executed without any parameter specified to display all
information in the trap buffer.
If the number of entries in the current trap buffer is smaller than the specified sizeval, all
entries are displayed.
Related command: info-center enable, info-center trapbuffer, display info-center.
Example
# Display the information in the trap buffer.
<3com> display trapbuffer
Trapping Buffer Configuration and contents:
enabled
allowed max buffer size : 1024
actual buffer size : 256
channel number : 3 , channel name : trapbuf