Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 11 NAT Configuration Commands
3Com Corporation
11-15
The static NAT entries configured using the nat static net-to-net command must not
conflict with those configured using the nat static command.
By default, no static net-to-net NAT entry is configured.
Example
# Configure a static net-to-net NAT entry, allowing the addresses in the range 10.1.1.1
to 10.1.1.100 to be translated into addresses on the segment 211.1.1.0 with their host
addresses unchanged.
[3Com] nat static net-to-net 10.1.1.1 10.1.1.100 global 211.1.1.0
255.255.255.0
11.1.14 reset nat
Syntax
reset nat session slot slot-number
View
User view
Parameter
slot slot-number: Number of the interface card, which only exists in the distributed
environment.
session: Clears the information of the address translation table.
Description
Use the reset nat command to clear up the mapping tables of address translation in the
memory and release all the memory dynamically allocated to store the mapping tables.
Example
# In a centralized environment, clear NAT log buffer.
<3Com> reset nat session
# In a distributed environment, clear information of the address translation table.
<3Com> reset nat session slot 10