Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 12 IP Unicast Policy Routing Configurati
on Commands
3Com Corporation
12-4
Related command: apply output-interface, apply ip-address next-hop, apply
default output-interface, and apply ip-address default next-hop.
Example
# Set the preference of IP packet to 5 (critical).
[3Com-route-policy] apply ip-precedence critical
12.1.5 apply output-interface (for Unicast Policy Routing)
Syntax
apply output-interface interface-type interface-number [ interface-type
interface-number ]
undo apply output-interface [ interface-type interface-number [ interface-type
interface-number ] ]
View
Route-policy view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the apply output-interface command to set a packet forwarding interface.
Use the undo apply output-interface command to cancel the configuration on a
forwarding interface.
This command is used to set the packet forwarding interface for the matched IP packet.
At most two forwarding interfaces can be specified.
Related command: apply ip-precedence, apply ip-address next-hop, apply default
output-interface, apply ip-address default next-hop.
Example
# Specify forwarding interface as serial0/0/0 for the matched IP packet.
[3Com-route-policy] apply output-interface Serial 0/0/0
12.1.6 display ip policy
Syntax
display ip policy