Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 12 IP Unicast Policy Routing Configurati
on Commands
3Com Corporation
12-5
View
Any view
Parameter
None
Description
Use the display ip policy command to view the routing policies of local and configured
interface policy routings.
This command is used to display the routing policies of local and configured interface
policy routings.
Example
# Display the routing policies of the local and configured interface policy routings.
<3Com> display ip policy
Route-policy Interface
pr02 Local
pr02 Virtual-Template0
pr01 Ethernet 0/0/0
The first line is prompt information. The first row shows where is used the routing policy
indicated in the second row. Take the first line as an example, "local" indicates that the
policy routing is used on the local router, that is, all packets sent from the local router
(not forward through it) using the policy routing "pr02". The second and third lines
represent that the interfaces virtual-template0 and Ethernet0/0/0 use route policy pr02
and pr01 respectively.
12.1.7 display ip policy setup
Syntax
display ip policy setup { local | interface interface-type interface-number }
View
Any view
Parameter
local: Displays the setting information of local policy routings.
interface: Displays the setting information of interface policy routings.
interface-type: Interface type.
interface-number: Interface number.