Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 12 IP Unicast Policy Routing Configurati
on Commands
3Com Corporation
12-9
Related command: ip policy route-policy.
Example
# Enable a local policy routing at system view. The policy routing is specified by
route-policy AAA.
[3Com] ip local policy route-policy AAA
12.1.12 ip policy route-policy
Syntax
ip policy route-policy policy-name
undo ip policy route-policy policy-name
View
Interface view
Parameter
policy-name: Policy name.
Description
Use the ip policy route-policy command to enable policy routing at an interface.
Use the undo ip policy route-policy command to delete the existing policy routing at
an interface.
By default, interface policy routing is disabled.
Related command: ip local policy route-policy.
Example
# Enable the policy routing specified by route-policy AAA at the interface Ethernet
0/0/0.
[3Com-ethernet0/0/0] ip policy route-policy AAA
12.1.13 route-policy
Syntax
route-policy route-policy-name { permit | deny } node { node-number }
undo route-policy route-policy-name [ permit | deny | node node-number ]
View
System view
Parameter