Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Error! Reference source not found.Error! Reference source not
found.
3Com Corporation
13-3
View
User view
Parameter
acl-number: ID of interface-based ACL ranging 1000 to 1999.
Description
Use the debugging ip multicast-policy command to enable the debugging of IP
multicast policy routing.
Use the undo debugging ip multicast-policy command to disable the debugging of
multicast policy routing.
The contents of the debugging information contain the route-node that the packets
match and the next hop/outgoing interface to which the packets are forwarded. The
debugging information output can be filtered with the interface-based ACL.
It should be noted that enabling the debugging would affect the performance of the
system. You should disable the debugging when the system is running normally.
Related command: route-policy.
Example
None
13.1.4 display ip multicast-policy
Syntax
display ip multicast-policy [ setup interface interface-type interface-num | statistic
interface interface-type interface-num ]
View
Any view
Parameter
interface-type interface-num: Specifies an interface by its type and number.
Description
Use the display ip multicast-policy command to view the multicast policy routing
information.
Example
# Display the information about the multicast policy routing configured on interface
Ethernet2/0/0.