Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-22
channel-name: A string of up to 30 characters excluding minus signs (-), forward
slashes (/) and backslashes (\).
Description
Use the info-center channel command to assign a name to the information channel
specified by channel-number.
Note that the assigned name must be unique.
Example
# Name Channel 0 as execconsole.
[3com] info-center channel 0 name execconsole
1.3.7 info-center console channel
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number in the range 0 to 9. The system has 10 channels.
channel-name: Channel name.
Description
Use the info-center console channel command to have the info-center output
information to the console over the specified channel.
Use the undo info-center console channel command to disable the current settings.
By default, no system information is output to the console.
This command becomes valid only when the syslog function is enabled.
Related command: info-center enable and display info-center.
Example
# Output information to the console and set the output channel.
[3com] info-center console channel console