Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series
611612613614615616617618619620
3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Static Route Configuration Commands
3Com Corporation
1-1
Chapter 1 Static Route Configuration Commands
Note:
For the specific examples and parameter explanation of VPN instance, refer to the
“MPLS” module of this manual.
1.1 Routing Table Displaying Commands
1.1.1 display ip routing-table
Syntax
display ip routing-table
View
Any view
Parameter
None
Description
Use the display ip routing-table command to view the routing table summary.
This command views routing table information in summary form. Each line represents
one route. The contents include destination address/mask length, protocol, preference,
cost, next hop and output interface.
Only current used route, i.e., best route, is displayed via the display ip routing-table
command.
Example
# View the summary of current routing table.
<3Com > display ip routing-table
Routing Table: public net
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Interface serial1/0/0
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Interface serial2/0/0