Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-23
1.3.8 info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Parameter
None
Description
Use the info-center enable command to enable the info-center.
Use the undo info-center enable command to disable the info-center.
By default, the info-center is enabled.
Only when the info-center is enabled can the system output information.
Related command: info-center loghost, info-center logbuffer, info-center
trapbuffer, info-center console channel, info-center monitor channel, display
info-center.
Example
# Enable the info-center.
[3com] info-center enable
% information center is enabled
1.3.9 info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]
*
undo info-center logbuffer [ channel | size ]
View
System view
Parameter
channel: Sets the channel for outputting information to the log buffer.
channel-number: Channel number in the range 0 to 9. The system has 10 channels.
channel-name: Channel name.