Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Static Route Configuration Commands
3Com Corporation
1-9
vpn-instance vpn-instance-name: Specifies the name of the VPN instance.
Description
Use the display ip routing-table protocol command to view the routing information of
specified protocol. If vpn-instance is not specified, the routing information of the public
network will be displayed; if vpn-instance is specified, the routing information of the
private network will be displayed.
Example
# Display all direct connection routes summary.
<3Com > display ip routing-table protocol direct
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask Proto Pre Cost Nexthop Interface:
20.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 DIRECT 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Proto Pre Cost Nexthop Interface
210.0.0.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
# Display the static routing table.
<3Com > display ip routing-table protocol static
STATIC Routing tables:
Summary count: 1
STATIC Routing tables status:<active>:
Summary count: 0
STATIC Routing tables status:<inactive>:
Summary count: 1
Destination/Mask Proto Pre Cost Nexthop Interface
1.2.3.0/24 STATIC 60 0 1.2.4.5 Ethernet 2/0/0
1.1.7 display ip routing-table radix
Syntax
display ip routing-table radix
View
Any view