Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Static Route Configuration Commands
3Com Corporation
1-11
Example
# Display the integrated routing information.
<3Com > display ip routing-table statistics
Routing tables:
Proto route active added deleted freed
BGP 0 0 0 0 0
DIRECT 5 4 5 0 0
RIP 0 0 0 0 0
STATIC 0 0 0 0 0
IS-IS 0 0 0 0 0
OSPF 0 0 0 0 0
O_ASE 0 0 0 0 0
O_NSSA 0 0 0 0 0
Total 5 4 5 0 0
1.1.9 display ip routing-table verbose
Syntax
display ip routing-table verbose
View
Any view
Parameter
None
Description
Use the display ip routing-table verbose command to view the verbose routing table
information.
With the verbose parameter, this command displays the verbose routing table
information. The descriptor describing the route state will be displayed first, then the
statistics of the entire routing table will be output and finally the verbose description of
each route will be output.
All current routes, including inactive routes and invalid routes, can be displayed using
the display ip routing-table verbose command.
Example
# Display the verbose routing table information.
<3Com > display ip routing-table verbose
Routing Tables:
Generate Default: no