Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-24
size: Sets log buffer size.
buffersize: Size of the log buffer (the message entries that can be accommodated).
Description
Use the info-center logbuffer command to enable the log buffer and specify the
channel for system information output as well as the size of the log buffer.
Use the undo info-center logbuffer command to cancel the current settings.
By default, information output to the log buffer is allowed and log buffer size is 512.
Only when the info-center is enabled can this command become effective.
By setting channel number after enabling log buffer, you can specify information output
direction.
Related command: info-center enable, display info-center.
Example
# Enable the info-center to send information to the log buffer and set the log buffer size
to 50.
[3com] info-center logbuffer size 50
1.3.10 info-center logfile
Syntax
info-center logfile channel { channel-number | channel-name } *
undo info-center logfile channel
View
System view
Parameter
channel: Information channel for outputting information to the log file.
channel-number: Channel number in the range 0 to 9. The system has 10 channels.
channel-name: Channel name.
Description
Use the info-center logfile channel command to have the info-center output system
information to the log file.
Use the undo info-center logfile channel command to cancel the current setting.
Only when the information center is enabled can this command become effective.
Related command: info-center enable, display info-center.