Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Static Route Configuration Commands
3Com Corporation
1-18
[3Com ] ip route-static vpn-instance vpn1 100.1.1.1 16 vpn-instance vpn1
1.1.1.2
1.3 Bandwidth-Based Unbalanced Load Sharing Commands
1.3.1 band-based-sharing
Syntax
band-based-sharing
undo band-based-sharing
View
System view
Parameter
None
Description
Use the band-based-sharing command to enable bandwidth-based unbalanced load
sharing.
Use the undo band-based-sharing command to disable bandwidth-based
unbalanced load sharing.
By default, bandwidth-based unbalanced load sharing is disabled.
As bandwidth-based unbalanced load sharing does not support per-flow load sharing,
you must disable fast forwarding on the incoming or outgoing interface when using the
function.
Example
# Enable bandwidth-based unbalanced load sharing.
[Router] band-based-sharing
1.3.2 display loadsharing ip address
Syntax
display loadsharing ip address ip-address mask
View
Any view
Parameter
ip-address: IP address of the destination network, in dotted decimal format.