Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Static Route Configuration Commands
3Com Corporation
1-20
Different from physical bandwidth, the configuration of load bandwidth does not affect
interface properties but load distribution. When you set the bandwidth argument to 0,
the current interface is shut down and do not participate in load sharing.
Example
# Configure the bandwidth for load sharing on interface Ethernet 0/0/0.
[3Com -Ethernet0/0/0] loadbandwidth 1000
[3Com -Ethernet0/0/0] undo loadbandwidth
1.3.4 reset loadsharing
Syntax
reset loadsharing { all | ip address ip-address mask }
View
User view
Parameter
all: Clears the statistics about unbalanced load sharing for all interfaces.
ip-address mask: IP address and mask of destination network. The specified mask
takes the dotted decimal format or the form of length.
Description
Use the reset loadsharing command to reset statistics about unbalanced load sharing
for all interfaces or the interfaces related to the equal-cost routes to the specified
destination network.
Example
# Clear the statistics about unbalanced load sharing
<Router> reset loadsharing all