Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-3
If no specific routing cost is specified when redistributing routes from other protocols
with the import-route command, the redistributing will be performed with the default
routing cost specified by the default cost command.
Related command: import-route.
Example
# Set the default routing cost of redistributing other routing protocol routes as 3.
[3Com -rip] default cost 3
2.1.4 display rip
Syntax
display rip
View
Any view
Parameter
None
Description
Use the display rip command to view the current RIP running state and its
configuration information.
Example
# Display the current running state and configuration information of the RIP protocol.
<3Com > display rip
RIP is turned on
public net VPN-Instance
Checkzero is on Default cost : 1
Summary is on Preference : 100
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Table 2-1 Description of the output information of the display rip command
Field Description
RIP is turned on RIP is enabled.
public net VPN-Instance Public networks in the VPN-instance