Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-4
Field Description
Checkzero is on Enables checkzero of RIP.
Default cost : 1
The default cost of the redistributed
route is 1.
Summary is on Enables route summary of RIP.
Preference : 100 The preference of RIP is 100.
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
Setting on the three timers of RIP
No peer router RIP has no peer router.
2.1.5 display rip interface
Syntax
display rip interface [ vpn-instance vpn-instance-name ]
View
Any view
Parameter
vpn-instance vpn-instance-name: Specifies a VPN by its name.
Description
Use the display rip interface command to display information about the specified RIP
interface or all RIP interface.
Example
# Display information about all RIP interfaces.
<3Com > display rip interface
RIP Interface: public net
Address Interface Pro MetrIn/Out Input Output Split-horizon
30.0.0.2 Mp-group1 RIP1 0/1 on on on
Table 2-2 Description on the fields of the display rip interface command
Field Description
Address
IP address of the RIP interface. You
must enable the RIP interface using the
network in RIP view