Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-25
Example
# Enable the info-center to send information to the log file.
[3com] info-center logfile channel 4
1.3.11 info-center loghost
Syntax
info-center loghost X.X.X.X [ channel { channel-number | channel-name } | facility
local-number | language { chinese | english } ] *
undo info-center loghost X.X.X.X
View
System view
Parameter
X.X.X.X: IP address of the log host.
channel: Information channel for the log host.
channel-number: Channel number in the range 0 to 9. The system has 10 channels.
channel-name: Channel name.
facility: Sets the logging tool of the log host.
local-number: Logging tool of the log host, in the range local 0 to local 7.
language: Sets the logging language.
chinese, english: Logging language, which can be Chinese or English.
Description
Use the info-center loghost command to have the info-center output information to
the log host.
Use the undo info-center loghost command to cancel the current setting.
By default, no information is output to the log host.
If not specified, the information channel for the log host defaults to channel 2 which is
named log host, the log host recording tool local-number to local 7, and the language to
english.
Only when the information center is enabled can this command become effective.
By setting the IP address of the log host, you can specify the information output
direction. You can set up to four log hosts.
Related command: info-center enable, display info-center.