Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-5
Field Description
Interface
Name of the RIP interface. Its IP
address is displayed in the Address field
Pro RIP version running on the interface
MetrIn/Out
The routing metric value added when
receiving or sending routes
Input
On indicates that the interface can
receive RIP packets and off indicates
the contrary.
Output
On indicates that the interface can send
RIP packets and off indicates the
contrary.
Split-horizon
On indictes that slit horizon is enabled
and off indicates that slit horizion is
disabled
2.1.6 display rip routing
Syntax
display rip routing [vpn-instance vpn-instance-name]
View
Any view
Parameter
vpn-instance vpn-instance-name: Specifies the name of the VPN.
Description
Use the display rip routing command to display the RIP routing table, including
normal routes and routes in garbage-collection status.
With vpn-instance not specified, RIP routes of the public network will be displayed;
with vpn-instance specified, RIP routes of the specified vpn-instance will be displayed.
Example
# Display RIP routes.
[Router] display rip routing
RIP routing table: public net
A = Active I = Inactive G = Garbage collection
C = Change T = Trigger RIP