Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-16
Example
# Specify Interface serial1/0/0 to use the simple text authentication with the key as aaa.
[3Com ] interface serial1/0/0
[3Com -Serial1/0/0] rip version 2
[3Com -Serial1/0/0] rip authentication-mode simple aaa
2.1.19 rip input
Syntax
rip input
undo rip input
View
Interface view
Parameter
None
Description
Use the rip input command to allow an interface to receive RIP packets.
Use the undo rip input command to cancel an interface to receive RIP packets.
By default, RIP packets at all interfaces (except loopback interface) can be received..
This command is used in cooperation with the other two commands: rip output and rip
work. Functionally, rip work is equivalent to rip input & rip output. The latter two
control the receipt and the transmission of RIP packets respectively on an interface.
The former command equals the functional combination of the latter two commands.
Related command: rip output and rip work.
Example
# Specify the interface serial1/0/0 not to receive RIP packets.
[3Com -serial1/0/0] undo rip input
2.1.20 rip metricin
Syntax
rip metricin value
undo rip metricin
View
Interface view