Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-24
Example
# Set timer Period update to 10 seconds and timer Timeout to 30 seconds.
[3Com ] rip
[3Com -rip] timers update 10 timeout 30
2.1.29 traffic-share-across-interface
Syntax
traffic-share-across-interface
undo traffic-share-across-interface
View
RIP protocol view, RIP MBGP address family view
Parameter
None
Description
Use the traffic-share-across-interface command to enable RIP to distribute traffic
equally on multiple interfaces using equal-cost routes.
Use the undo traffic-share-across-interface command to disable traffic sharing
across interfaces.
By default, traffic sharing across RIP interfaces is disabled.
Example
# Enable RIP traffic sharing across interfaces.
[Router-rip] traffic-share-across-interface
# Enable RIP traffic sharing across interfaces in RIP MBGP address family view.
[3Com ] ip vpn-instance 3Com
[3Com -vpn-xhy] route-distinguisher 100:1
[3Com -rip] ipv4-family vpn 3Com
[3Com -rip-af-vpn-instance] traffic-share-across-interface
2.1.30 validate-source-address
Syntax
validate-source-address
undo validate-source-address