Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 RIP Configuration Commands
3Com Corporation
2-25
View
RIP protocol view, RIP MBGP address family view
Parameter
None
Description
Use the validate-source-address command to enable checking of the source address
of a RIP packet upon reception.
Use the undo validate-source-address command to cancel checking of the source
address of a RIP packet. With the source address of a RIP packet not checked,
indirectly connected RIP routes can be exchanged. This command applies to the RIP
protocol both running in public networks and private networks in a MPLS VPN.
By default, the source address of a RIP packet is checked.
Example
# Configure not to check the source address of a RIP packet received.
[Router-rip] undo validate-source-address
# Configure not to check the source address of a RIP packet received.
[Router-rip] ipv4-family vpn-instance 3COM
[Router-rip-af-vpn-instance] undo validate-source-address