Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-7
3.1.8 default limit
Syntax
default limit routes
undo default limit
View
OSPF view
Parameter
routes: Default value to the redistributed external routes in a unit time, ranging from 200
to 2147483647. By default, the value is 1000.
Description
Use the default limit command to configure default value of maximum number of
redistributed routes.
Use the undo default limit command to restore the default value.
OSPF can redistribute external route information and broadcast them to the whole
autonomous system, so it is necessary to regulate the default value of external route
information redistributed in one process.
Related command: default interval.
Example
# Specify the default value of OSPF redistributing external routes as 200.
[3Com -ospf-1] default limit 200
3.1.9 default tag
Syntax
default tag tag
undo default tag
View
OSPF view
Parameter
tag: Default tag, ranging from 0 to 4294967295 and defaulting to 1.