Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-28
Example
# Set SNMP information channel to channel 6.
[3com] info-center snmp channel 6
1.3.15 info-center source
Syntax
info-center source { module-name | default } { channel { channel-number |
channel-name} } [ log { state { on | off } | level severity }* | trap { state { on | off } | level
severity } * | debug { state { on | off } | level severity }* ]*
undo info-center source { module-name | default } { channel { channel-number |
channel-name }
View
System view
Parameter
module-name: Module name.
default: Includes all modules by default.
channel-number: Information channel number to be set.
channel-name: Information channel name to be set.
log: Log information.
trap: Trap information.
debug: Debugging information.
on: Enables outputting information.
off: Disables outputting information.
level: Sets information level to disable the info-center to output information at this or
higher level.
severity: Information level. As shown in the following table, the info-center divides
information into eight levels by severity or emergency, with a lower level indicating an
event more emergent event. Level 1 represents emergencies and level 8 represents
debugging.
Table 1-7 Definition of information level
Severity level Description
emergencies
The extremely emergent errors
alerts
The errors that need to be corrected
immediately.